Free Tools
/
Duration Calculator
Video Duration Checker & Calculator
Check the length of an audio or video file, or add up a list of durations to get the total time.
Check a runtime or total up a list
Best for
Editors, podcasters, students and creators who need a runtime for planning, upload checks, a watch list, or transcription estimates.
What it does
Select a file and your browser reads its duration from the metadata, or paste durations such as 1:23:45, 90 min or 110 and get the total in hours, minutes and seconds.
Before you rely on it
File results depend on whether your browser can read the file's metadata. Plain numbers use the unit you choose, so check it before relying on a total. Nothing is uploaded or transcribed.
Transcribe a short audio clip
Create chapter timestamps
Find watch time at 1.5x or 2x
Add and subtract hours and minutes
Check a file
Supports MP4, MP3, WAV, MOV, WebM, OGG, M4A, and more
Click to select a media file
The browser reads the selected file's media metadata
Add up durations
One per line or separated by commas: 1:23:45, 45:30, 1h 20m, 90 min. Start a line with - to subtract it.
Durations to add up
Plain numbers are
How the adder reads what you type
The adder accepts three kinds of entry, and mixing them in one list is fine. Clock times are read as hours, minutes and seconds: 1:23:45 is 1 hour, 23 minutes and 45 seconds. Unit text such as 1h 20m, 90 min or 2.5 hours is read by its units. A bare number has no unit of its own, so it takes the one chosen in the Plain numbers are menu.
Two details cause most wrong totals. First, a clock time with only one colon is minutes and seconds, so 1:30 is 90 seconds, not an hour and a half. Write 1:30:00 for that. Second, a bare 90 is 90 minutes when the menu says minutes, 90 seconds when it says seconds and 90 hours when it says hours. If a total looks off by a factor of 60, check the menu first.
| You type | Read as | Seconds |
| 1:23:45 | 1 hour, 23 minutes, 45 seconds | 5025 |
| 45:30 | 45 minutes, 30 seconds | 2730 |
| 1h 20m | 1 hour, 20 minutes | 4800 |
| 2.5 hours | 2 hours, 30 minutes | 9000 |
| 90 (menu set to minutes) | 90 minutes | 5400 |
| 90 (menu set to seconds) | 90 seconds | 90 |
Worked example: three films, then faster playback
Take three films of 110, 179 and 201 minutes. Typed with plain numbers set to minutes, they total 490 minutes, which is 8 hours and 10 minutes. That is the time at normal speed. If you watch at a faster setting, the time shrinks in proportion, and the result card shows it for you once the list has a total.
| Playback speed | Time for 8:10:00 of video |
| 1x | 8:10:00 |
| 1.25x | 6:32:00 |
| 1.5x | 5:26:40 |
| 1.75x | 4:40:00 |
| 2x | 4:05:00 |
Plan a watch list or a course
Total time is only useful when you turn it into a schedule. Divide the total by the time you can give each day and round up. A course made of lectures that add up to 8 hours and 10 minutes takes 9 sessions of 1 hour (490 divided by 60 is 8.2, rounded up). At 1.5x the same course is 326 minutes, so 45-minute sessions finish it in 8 days (326.7 divided by 45 is 7.3).
Add your own time too. Pausing to take notes or replay a section can easily double the real time, and the tool cannot know that. Treat the total as a lower bound and the speed table as a way to compare plans, not a promise. Spoken content that you plan to search later does not need a full replay at all: a transcript lets you jump to the part you need.
Get a runtime from a file, and what can go wrong
- Click Check a file and choose an audio or video file from your device.
- Your browser loads only the file's metadata and reports its duration. The file is not uploaded and its contents are not analysed.
- Read the length in clock form, in words and in seconds to three decimals, then copy whichever you need.
The result depends on the browser. If it cannot read the container or codec, for example an unusual format or a damaged file, it reports no duration and the tool shows an error instead of guessing. Try another browser, or convert the file to MP4 or MP3 and check again. Seconds with three decimals are useful when you are matching a cut to an exact frame boundary or filling a field that expects seconds.
A file's length is what it contains. It can differ from the number shown on a video site when an intro, an ad or a trimmed ending is not in the file you have, so check the file you are actually going to upload.
Subtract time, and keep totals honest
- Start a line with a minus sign to take time off the total, for example -15 min for a section you will skip.
- Totals are shown in whole seconds. Fractions you type, such as 0:07.5, are kept in the sum and rounded only for display.
- Entries that cannot be read are listed as not counted and left out of the total, so a typo never changes it silently.
- Only the first 1,000 entries are added up. For a whole YouTube playlist, the playlist length calculator reads the links for you.
From total time to something you can use
Knowing that a pile of recordings runs for 8 hours is the start. If you need the content rather than the runtime, a transcript turns the hours into text you can search for a word and open at the right minute. The free tools linked below cover short clips and YouTube videos; the full product handles longer recordings.
Frequently asked questions
How do I add up several video durations?
Paste them into Add up durations, one per line or separated by commas, in forms such as 1:23:45, 45:30, 1h 20m or 90 min. The total updates as you type, in hours, minutes and seconds.
How long are three films of 110, 179 and 201 minutes?
490 minutes, which is 8 hours and 10 minutes. Type 110, 179, 201 with plain numbers set to minutes to get the same total.
How do I find the length of a video file?
Select the file under Check a file. Your browser reads the duration from the file's metadata and shows it with the file size. The file is not uploaded.
Can I subtract a duration from the total?
Yes. Start a line with a minus sign, for example -15 min, to take it off the total.
Is anything I enter uploaded?
No. Both parts run in your browser: the file checker reads only the file's metadata on your device, and the durations you type are not sent anywhere.
Why is 1:30 read as 90 seconds?
A time with one colon is minutes and seconds. Type 1:30:00 for an hour and a half, or 1h 30m.
How long is 8 hours of video at 1.5x speed?
5 hours, 26 minutes and 40 seconds for 8:10:00, because playback time is the total divided by the speed. The result card lists 1.25x, 1.5x, 1.75x and 2x for any total.
Why does a file show an error instead of a length?
Your browser could not read that file's metadata, which happens with unusual formats or damaged files. Try another browser, or convert the file to MP4 or MP3.
How the file checker works
The file checker uses your browser's built-in media capabilities to read the duration reported in an audio or video file's metadata. It does not transcribe or inspect the spoken content. The adder reads the durations you type and adds them up on your device.
Supported formats
Compatibility follows the formats and codecs your browser can play. Common examples include:
- Video: MP4, WebM, MOV, AVI, MKV
- Audio: MP3, WAV, M4A, OGG, FLAC, AAC
Common uses
- Check podcast episode length before publishing
- Calculate video duration for transcription quotes
- Verify media file duration before uploading
- Get precise timing for video editing
- Add up the runtimes of several videos, episodes or films
For a whole YouTube playlist, the YouTube Playlist Length Calculator adds up every video for you.
Love this free tool?
Ready to transcribe? Get timestamps automatically
Try Libraryminds Free